Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese)

Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) - Versione stampabile

+- Mx5Italia (https://www.mx5italia.com/forum)
+-- Forum: Mondo MX-5 (https://www.mx5italia.com/forum/forum-4.html)
+--- Forum: Mx5Italia Garage (https://www.mx5italia.com/forum/forum-20.html)
+--- Discussione: Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) (/thread-18469.html)

Pagine: 1 2 3

Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) - marginal-style - 24-05-2012

The car drove for a year like this, then you start connetre me, I'm still tired
Logically, I went with a new development that will call, Evo 4

Then know that the assembly requires a lot of attention if you want perfection.
On my MIMIX, a lot of work on the fenders, was achieved (which is invisible), to stick to the best form of self.

Here you can see the pilot has left side diode (Thanks to an LED bulb) and right in the original pilot
He did not say, of the lunimosité LED bulb, and really most beautiful, do not esce?

Then once the fenders in place and adjusted, integrate, a black Brilland live full, lands on the MIMIX

And also ...
Flashing Style Z
dispatcher white
Eyelid of Lights
Alue chrome button
Pirate flag on the antenna whip

But up to photographs

Uploaded with ImageShack.us

Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) - marginal-style - 24-05-2012

Then I desired again and again bring personal touches

Et voici ainsi l'evo 5

As the carvings on the windows, made by me .... Wink

Besides all the work and are made by me .... Wink

flame cutting Peco
injector washer fluid ice Chrome
Wiper Chrome
Alpine amplie, Subwoofer.
Secour wheel under the body
Engraving glass
Theme in keeping with the style of the car and my personality.
Reminds the blase of a brand, including the Miata has hacked the line

Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) - marginal-style - 24-05-2012

To be continued

Evo 5 Evo 6 changes since

blade before
Changing Intercooler
A wheel chock as
Shadows of several element that was previously Chrome ....

Pitc for the téléton

[Immagine: 3903463980721015059619252331312672391831...93550n.jpg]

Evo since last EVO5
Fog lights Harley, edging the amount of glass and chrome rear bumper
Liserai suprimé outline, a shadow
Calle 5 cm Front Wheel, Rear 8 cm
Ultra tight 195.45.16 tire sidewall rim 10 "wide.
Blade before very bad

Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) - Doppiaeffe - 24-05-2012

marginal-style Ha scritto:Go Now the real fun: D

Try installing the first by flying miata turbo to see if it all goes well, just before the camouflage of the beam and sanding

Sanding the white bonnet, to polish it.
Thank you lol aluminum hood, working hours .......

By the way black paint on it given element for a brand new look

Here this photo, for everyone has shown that one little change in its gusset joints, provided the ball is good.

[Immagine: mazdamx5maniak07margina.th.jpg]

[Immagine: rotationdemazdamx5mania.th.jpg]

Then I started a 2nd fan on the radiator, however, requires some editing to make the rose.

I preset the position of the intercooler but you have much work to put up with the millimeter shield

As some see in the photos, this intercooler must subire SEVERAL changes to implement

Radiator assisted steering, discing, modification dévirateur air, manufacturing support.

[Immagine: rotationde25022010474.th.jpg]

Current developments of the project, without the commentary.

End of the sanding has white cover remains to be polished

Lighthouse Golf MKII from tuning, black malt Cross

If one of you wants this piece that I hesitate to ask me Wink

So already the mounting of lights, study .. and mounting.

Video TUTORIAL for mounting headlights Golf MKII on a Miata ..

http://www.youtube.com/watch?v=tU8g_HsQR7Q
http://www.youtube.com/watch?v=pyPWIHTSB-E

No comment

[img][/img]

So far, changes in paris already over a year, as many other things going.

Mounting the MIMIX, is an outlet for a little relaxation, some people drink accool, others play sports, others playing the game, I tinker my MixMix, orgasms and I roll with then, the pride of having made one work.

I'm crazy, that self like it or not the other, me, I like it, and gives me pleasure énorment.

Mechanics, bodywork and pleasant time cella, do not become a constraint.

..............................................................................................................................................

Exhaust side finished
I cut the rocker spent a tube 60, sealed, then mounted a motorcycle out of pots.
We love or we hate.

This time the car is painted
1L8 clutch with flywheel
Kombiné filte - 12 cm.

She rubs the floor 14 "lol (rim moved to self)

url]http://www.youtube.com/watch?v=3pf3CfO4Y-0[/url]

Montage de L ECU fllying miata

Uploaded with ImageShack.us

First turn of the wheel
Sound

http://www.youtube.com/watch?v=FXoaAJKSOo0

Conclusion de la 3 eme évolutions .

engine
1L6 engine nose court 91 years
KIT flying miata:
Turbo
440cc injector
candle specific
Specific beam injection and engine
Fuel pump high flow coupled
Specific air hose
Intercooler Front
2 fans on the radiator
Link electronic box
Specific electronic management from the cockpit at will
overs boost
Direct line with out in the rocker
Dunp valve
High flow water pump
Clutch flywheel with 1L8 1L8

Chassis ....
combined thread
Gotti polished rim 10 x16

body
Blue tint
polished cover
Fires Golf 2 Smoked black Maltese cross
Cover with Lighthouse entered air
Body color tint distributor
Mask on the taillights
Anténe Whip
Rear bumper cutout
Silencieu in the molded side sills
flared fenders
Retro 70s Style Shells

and other photo

look at the exhaust side[/QUOTE]

epic winfor the side exaust!

Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) - marginal-style - 24-05-2012

Place now, the project on the Miata Future ........

For the exterior of the vehicle, I will wish to look close to this one.
If you want to sell slides side, I'm your man, because I research, otherwise I would be obliged, I have to make, with the fiber.

In interrieur, I started work.

Here, housing for the subwoofer Focal, volume 26 liters closed and anti vibrasion in bass reflex.

And beginning of couvrage leather, leather of the passenger interrieur
All being homemade, or appearance of, amateur.
But you is not it more enjoyable, than to design all, or even?

Here, I embroider the logo look version of Lotus Miata, and my name

Here, the dash partially dressed

here, inside the boot being dressing

engine

Refurbishment of the engine.
The head of origne with melted pistons, following the strong pressure of 0.8 bar, I decided to spent engine piston 1L6 323 GTR (B6T), this engine was in a garage in the abandonment .
So I decided to recovered, made for a hybrid engine (with the B6 origin of my miata).

For cella, I first retrieved, pistons and connecting rods 323 GTR engine, then the camshaft, that of the exhaust side (more open)

The photographs.

In this picture, here is the engine before the refurbishment!

Look, in these photos as the pistons of origin suffered from the pressure.
Friendly advice, if you overfeed your engine, be careful, not to show the pressure, even with a very good management electronics!

In this photo, I made a break-in engine block ,with a water pump new

The engine will be fitted with a clutch of origin (softest) to 323 GTR (larger diameter than the clutch miata 1L8), however, I concerverai the flywheel miata 1L8, much lighter than 2 kg 300.

Small interlude in this photo, the lighting of the counter thanks iodine has a xenon

In this photo, the pistons original Mazda 323 GTR (type B6T) capable of supporting a bar 500 with the original computer, with my little management with programmable infinite .... Link
However, I keep the bridge, the original box with all the other moving parts, because I not go beyond a bar 200, an output estimated at 200 hp reliable or widely enough for the cruising ....

In this picture, the holes for the oil catch tank and an oil return.

In this photo, the establishment of the temperature probe before the oil cooler (I go up two oil temperature sensor) 2 that 1 am better you aurras in the bone)
Note, before the engine is the painting stage, camouflage theme has come, the dessert storm of war in Iraq, with a marginal hair style recess.

One last picture for now, here, the photo of the slide being restored and preparation ....

Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) - marginal-style - 24-05-2012

Merci Doppiaeffe ,d'avoir pris le temps de me corriger ,cela me touche ,beaucoup de ton intéressement.

Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) - marginal-style - 24-05-2012

Doppiaeffe , existe t'il ,un liens pour voir ta mx5 ?

Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) - Doppiaeffe - 24-05-2012

marginal-style Ha scritto:Doppiaeffe , existe t'il ,un liens pour voir ta mx5 ?

mmm sorry i don't speak french.

mmm mi spiace nn parlo francese.

Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) - Luca - 24-05-2012

wow beautifll miata and very good work!!!!

Le fabuleux destin de mimix (En évolution) (Scritto in origine italiana e francese) - Gagio - 25-05-2012

Doppiaeffe Ha scritto:mmm sorry i don't speak french.

mmm mi spiace nn parlo francese.

Vuole un link per vedere la tua MX5.