Jenvey IRTB Group Buy **REV9** - Versione stampabile

Jenvey IRTB Group Buy **REV9** - Versione stampabile

+- Mx5Italia (https://www.mx5italia.com/forum)
+-- Forum: Vendo e compro (https://www.mx5italia.com/forum/forum-8.html)
+--- Forum: Gruppi d'acquisto (https://www.mx5italia.com/forum/forum-34.html)
+--- Discussione: Jenvey IRTB Group Buy **REV9** (/thread-14747.html)

Pagine: 1 2

Jenvey IRTB Group Buy **REV9** - REV9 Autosport - 14-09-2011

Hey everyone!

I'm sure all of you will enjoy this offer I worked out with Simon @ Jenvey Dynamics.

Many of us wanted a neat IRTB kit but couldn't find anything near plug and play.

Well, Jenvey listened to us and made IRTB manifolds for NA 1.6 & NB 1.8 (NA 1.8 being tested at the moment).

Price is the same for all year Roadsters!

[Immagine: DSC_6192.jpg]

***NOTE THAT THE CARBON FIBER TRUMPHETS COST MORE***

REV9 IRTB Kit (by Jenvey) includes the following:

-Full IRTB Kit & Matching Manifold for your vehicle year
-Fuel Rail
-Linkage Kit
-Linkage Braket & Rod TB Over
-Throttle Position Sensor
-Air Control Valve Kit (4 port)

Retail : $1999.99
Price (1-5 buyers) : $XXXX
Price (6-10+ buyers) : $XXXX

We're trying our best to give good deals to our customers and if the exchange rate gets better, we will try even harder!

There are tons of options that can be available, too!

A last picture for your viewing pleasure...

[Immagine: DSC_6201.jpg]

*********************************************************
UPDATED 30/08/11 READ IF YOU NEED ECU
*********************************************************
I've talked with an electronic engineer who's actually making plug and play MegaSquirt for major Miata tuners and he could make a setup for the JENVEY IRTB users.
Basically, this person owns a 2002 Miata and does have JENVEY IRTB on his vehicle. He can make a customer's ECU based on his requirements based on the MS2V3:
-Alternator control
-P/S Idle up
-A/C Idle up
-Progressive overheating warning through CEL
-800/1000rpm idle with/out A/C
-A/C cutoff at WOT and/or high RPM
-Basemap for JENVEY IRTB
... and the list goes on.

The ECU will be made to order so it fits your car and has the options you need. The maker told me he can make it so your car doesn't feel like a sketchy race car, but like if it was OEM and comfortable.

PRICE 1-5 : $750.00 + (low) shipping
PRICE 6-9 : $XXX + (low) shipping
PRICE 10+ : $XXX + (low) shipping

*********************************************************
UPDATED 07/09/11 AVAILABLE ACCESSORIES
*********************************************************

Please note that there are already some airhorns included in the JENVEY KIT.
(1) Price if 1 in total group buy sold, (2+) price is 2+ in group buy sold.

JENVEY (click for picture)
Air horns (cheapest) : (1) $104.99 ; (2+) $XXX
... there are many choices between those 2 options
Air horns (most expensive) : (1) $309.99 ; (2+) $XXX
Jenvey airbox + backplate : (1) $174.99 ; (2+) $XXX

JUBIRIDE (click for picture)
Jubiride MESH low-profile filter : (1) : $114.99 ; (2+) : $XXX
Jubiride air cleaner set : (1) : $359.99 ; (2+) : $XXX
Jubiride 90mm aluminum trumphets : (1) : $159.99 ; (2+) : $XXX

Don't hesitate to ask us about other accessories you don't see in the list! We'll, as always, make you a good price on it!

*********************************************************
OFFICIAL BUYER LIST
*********************************************************
JENVEY NA 1.6 IRTB KIT
1. Good Enough + Jenvey AIRBOX
2. owm (Singapore) DEPOSIT
3. Rac3Sp3c
4.
5.

JENVEY NA 1.8 IRTB KIT
1. Venice
2. oztrackdays (Australia) DEPOSIT
3. EvDog + Jenvey AIRBOX DEPOSIT
4. Manusdei (Australia)
5.

JENVEY NB 1.8 IRTB KIT
1. elitee (Australia) +MS + Jenvey AIRBOX
2. jadys + Jenvey AIRBOX DEPOSIT
3. jdmfc3s90
4. bayside blue
5. mmx005 (Australia) + Jenvey AIRBOX

Jenvey IRTB Group Buy **REV9** - Rava86 - 14-09-2011

Great job! Unfortunatly actually my resources are very poor but in future, when i will have the possibilityes to stop my car for a while i think this will be my way.
Bye.

Rava

Jenvey IRTB Group Buy **REV9** - REV9 Autosport - 15-09-2011

Those who want the $XXXX price, you need to pay (fully) before October 15th 2011.
Those who want the $XXXX price, you need to pay (deposit) before October 15th 2011 and (fully) before January 15th 2012.

Jenvey IRTB Group Buy **REV9** - marvel - 17-09-2011

Hallo,
I have some questions for you?

A) Which sensors it is necessary to replace and are there in the kit?
B) And for the sensor air flow?
C) How to resolve for the booster brake vacuum?
D) For the Idle air circuit? Is there in the kit a adaptor for runnning the OEM idle control valve, that, as for the idle circuit, it will controlled by new ecu?
E) For the fuel rail and the injectors?
F) Is possible to take the intake manifold with surface all polished?
F) Another modifications?

Thanks

Jenvey IRTB Group Buy **REV9** - Everlastingfire - 17-09-2011

It's a great product, however, we can buy it for less money in UK, saving on shipment and custom taxes as well...

Jenvey IRTB Group Buy **REV9** - REV9 Autosport - 17-09-2011

Questions answered in RED.

marvel Ha scritto:Hallo,
I have some questions for you?

A) Which sensors it is necessary to replace and are there in the kit? All required sensors to replace are those for the ECU (Intake Air Sensor, etc) and are included in the ECU package.
B) And for the sensor air flow? It can be removed with the ECU package.
C) How to resolve for the booster brake vacuum? There is no problem with this.
D) For the Idle air circuit? Is there in the kit a adaptor for runnning the OEM idle control valve, that, as for the idle circuit, it will controlled by new ecu? All included in our kit (Air control valve kit).
E) For the fuel rail and the injectors? Fuel rail included in the kit and you'll use OEM injectors or you can upgrade.
F) Is possible to take the intake manifold with surface all polished? I *guess* it may be possible, however, I am not sure. Right now, the black is the only option, but I'll check if that's an option if you really want it.
F) Another modifications? No, all you may need is a WIDEBAND (ie: AEM UEGO) to know your air/fuel pressure, but if you have the car professionally tuned, they will use one themselves.

Thanks

Jenvey IRTB Group Buy **REV9** - REV9 Autosport - 17-09-2011

Everlastingfire Ha scritto:It's a great product, however, we can buy it for less money in UK, saving on shipment and custom taxes as well...

Our kit would ship from UK directly, so cheap shipping and no customs whatsoever. Jenvey does not offer the same kit as we do (full kit with everything needed), it is why it's cheaper on their site. They just offer the throttle bodies and manifold. Also, we offer an ECU package that they don't and finally, if you can have it cheaper at Jenvey, we will gladly match the price.

Jenvey IRTB Group Buy **REV9** - marvel - 19-09-2011

REV9 Autosport Ha scritto:Questions answered in RED.

Are you sure that it is possible run whit OEM injectors? I know that the Mazda injectors are too small in the head.
What means, for booster brake vacum:There is no problem?
I need a kit for NB or Mk2 1,6. Is this possible?

Jenvey IRTB Group Buy **REV9** - REV9 Autosport - 21-09-2011

marvel Ha scritto:Are you sure that it is possible run whit OEM injectors? I know that the Mazda injectors are too small in the head.
What means, for booster brake vacum:There is no problem?
I need a kit for NB or Mk2 1,6. Is this possible?

I think you will need to swap the injectors as they will not be able to flow enough fuel for the engine. As its gone up about 40% in power I don’t think the injectors will be suitable.

The manifolds have bosses on them which you can drill for the brake booster.

As for the NB 1.6L kit, the only we can offer would be the NA 1.6L manifold and you *might* need modifications. We don't know the NB 1.6L enough to confirm it'll fit perfectly.

Jenvey IRTB Group Buy **REV9** - .SharK - 21-09-2011

Max can you please contact Jenvey and ask? Here in europe we are a lot with 1.6 NB. It can be very interesting to know. I.e. the exhaust side is exactly the same, but I don't know anything about intake side!