Dalla brochure:
SPRAYING: Pressure pot may be used (siphon cup not recommended). Dilute with recommended thinners up to 50% as needed. Gently mix before spraying. Apply wet overlapping coats, holding gun 6" -12" from surface, using a 4"-6" pattern. Allow 10 -20 minutes dry time before applying additional coats to desired thickness.
RECOMMENDED EQUIPMENT AND SETTINGS:
Gun: Binks model 95
Nozzle: 63B
Needle: 663A
Material: 20 -25psi
Atomization: 15 -25psi
Dilution: as needed
Cap: 63PB (up to 50% dilution) or 66S D (up to 50% dilution) for heavier build up.
Clean up: see recommended thinners.
SPRAYING: Pressure pot may be used (siphon cup not recommended). Dilute with recommended thinners up to 50% as needed. Gently mix before spraying. Apply wet overlapping coats, holding gun 6" -12" from surface, using a 4"-6" pattern. Allow 10 -20 minutes dry time before applying additional coats to desired thickness.
RECOMMENDED EQUIPMENT AND SETTINGS:
Gun: Binks model 95
Nozzle: 63B
Needle: 663A
Material: 20 -25psi
Atomization: 15 -25psi
Dilution: as needed
Cap: 63PB (up to 50% dilution) or 66S D (up to 50% dilution) for heavier build up.
Clean up: see recommended thinners.
La ND non esiste.