Here You can see a really serious project.
This NC is getting a Borg Warner EFR7163 turbocharger on a forged engine running with 1.3 bar boost tuned with a MS3. It will produce around 400hp at the flywheel with 455Nm/336lbft torque.
It also gets a full roll cage, fender flares, gearbox oil cooling system and differential oil cooling system.
![[Immagine: 8tdagqy5.jpg]](https://s19.directupload.net/images/191213/temp/8tdagqy5.jpg)
![[Immagine: bpf4duun.jpg]](https://s19.directupload.net/images/191213/temp/bpf4duun.jpg)
![[Immagine: st27oqew.jpg]](https://s19.directupload.net/images/191213/temp/st27oqew.jpg)
![[Immagine: pslc4h4y.jpg]](https://s19.directupload.net/images/191213/temp/pslc4h4y.jpg)
![[Immagine: tbei2d79.jpg]](https://s19.directupload.net/images/191213/temp/tbei2d79.jpg)
![[Immagine: pya75ybo.jpg]](https://s19.directupload.net/images/191213/temp/pya75ybo.jpg)
Best regards
Guido from SPS
This NC is getting a Borg Warner EFR7163 turbocharger on a forged engine running with 1.3 bar boost tuned with a MS3. It will produce around 400hp at the flywheel with 455Nm/336lbft torque.
It also gets a full roll cage, fender flares, gearbox oil cooling system and differential oil cooling system.
![[Immagine: 8tdagqy5.jpg]](https://s19.directupload.net/images/191213/temp/8tdagqy5.jpg)
![[Immagine: bpf4duun.jpg]](https://s19.directupload.net/images/191213/temp/bpf4duun.jpg)
![[Immagine: st27oqew.jpg]](https://s19.directupload.net/images/191213/temp/st27oqew.jpg)
![[Immagine: pslc4h4y.jpg]](https://s19.directupload.net/images/191213/temp/pslc4h4y.jpg)
![[Immagine: tbei2d79.jpg]](https://s19.directupload.net/images/191213/temp/tbei2d79.jpg)
![[Immagine: pya75ybo.jpg]](https://s19.directupload.net/images/191213/temp/pya75ybo.jpg)
Best regards
Guido from SPS