http://www.jassperformance.com/shop/mazd...Headlights
Stealth (Flush) MK1 Headlights
The Jass Performance Flush Headlights were initiated as performance mod, aimed to reduce weight and optimise air route and temperatures. Best at this, they were later design and function optimised and developed further towards the following requirements.
-Tempting, integrated design
- Optimal light output
-Perfect fit and minimal (less than OEM) tolerances
- Straight, fully reversible fit, without modifications
-Lightweight
-Long lasting finish (scratch, UV resistant)
-Fully (literealy) adjustable option, as nearly all of those cars, have seen accidents, leading to smaller or larger tolerance differences
-Reuse of OEM bonnet support rod
-Washer expansion tank relocation kit
-Fuel charcoal canister relocation kit
-Optional Cold Engine Side Air Intake kit (to follow in short as a add on)
-Happy to confirm the featured end products ticks all checkboxes and the design speaks for itself.
The installation is intuitive and doesnt take long, supported by a provided manual. Everything needed is provided with the kit.
The used headlight units are the ones we use in the Jass Performance Low Profile light, as their very good light output has been constatly confirmed over the years. Should you already have the Low Pros, an option for the Flushed Headlights without the headlight units is provided.
Photos of the estimated tight fit are available in the image gallery. As the development and testing took few good years, their design could get direct confirmation at few shows and their function in real life or track use, as seen in the gallery.
Stealth (Flush) MK1 Headlights
The Jass Performance Flush Headlights were initiated as performance mod, aimed to reduce weight and optimise air route and temperatures. Best at this, they were later design and function optimised and developed further towards the following requirements.
-Tempting, integrated design
- Optimal light output
-Perfect fit and minimal (less than OEM) tolerances
- Straight, fully reversible fit, without modifications
-Lightweight
-Long lasting finish (scratch, UV resistant)
-Fully (literealy) adjustable option, as nearly all of those cars, have seen accidents, leading to smaller or larger tolerance differences
-Reuse of OEM bonnet support rod
-Washer expansion tank relocation kit
-Fuel charcoal canister relocation kit
-Optional Cold Engine Side Air Intake kit (to follow in short as a add on)
-Happy to confirm the featured end products ticks all checkboxes and the design speaks for itself.
The installation is intuitive and doesnt take long, supported by a provided manual. Everything needed is provided with the kit.
The used headlight units are the ones we use in the Jass Performance Low Profile light, as their very good light output has been constatly confirmed over the years. Should you already have the Low Pros, an option for the Flushed Headlights without the headlight units is provided.
Photos of the estimated tight fit are available in the image gallery. As the development and testing took few good years, their design could get direct confirmation at few shows and their function in real life or track use, as seen in the gallery.
Erza Silver -> NA 1.6 90hp 'cruscotto piatto'
http://www.mx5italia.com/showthread.php?...r-1-6-90hp
A dumà
http://www.mx5italia.com/showthread.php?...r-1-6-90hp
A dumà