karlitos Ha scritto:ennesima discussione sui distanziali.... ma per non mettere i doppia bulloneria??? 5mm o 10 mm ci rientriamo su nc? o si devono prendere doppia bulloneria per forza? tnx:chessygrin:
There are two types of spacers. Plain and hubcentric.
Plain are light and cheap and unisversal.
Hubcentric are model specific, with a ring in the center that matches the car's center hub.
A set of four plain spacers costs 30 euros, while a set of four hubcentrics can cost up to 200 euros.
You can fit up to 7 mm spacers to a Miata and still keep and bolt safely the oem nuts.
But you CANNOT weight the wheel, which means there will be a tremble on the steering wheel at 120 km/h.
With plain spacers you can only weight the wheels if you fit the smaller 3 mm spacers.
If you want to go more than 7 mm, for example 10 or 15 mm, you MUST go hubcentric and with it's own bolts.
A.